User’s Manual
60
Event
Select the
Event
tab and then a camera number in the
Channel
buttons below. Clicking the
(Find) button after
setting up the search condition displays the list of event recorded video of the selected camera. Netcam alarm in,
audio detection, tampering and tripzone is supported for hybrid products only.
Channel
: Select a camera number.
Target Event:
Select a desired event type.
Text-In
Select the
Text-In
tab and then a device number in the
Channel
buttons below. Clicking the
(Find) button after
setting up the search condition displays the list of recorded video which are associated with the selected text-in
device.
Channel
: Select a text-in device number.
Case Sensitive
: Distinguishes between
capital letter and small letters entered in the
Name
box.
Name
: Enter the text to find.
Comp:
Enter the comparison operator.
Value
: Enter the comparison value.
NOTE:
The tab and line can be used for more
specific search of the text-in data. Use a symbol
‘^’ indicating the location of each individual
category, and ‘]’ indicating the line where the
category is located. Refer to
Tab size
: Enter the tab size. Up to eight tabs
can be set.
Save Config
: Saves the current text-in related
settings.
Load Config
: Loads the saved text-in related
settings.
Summary of Contents for ID391H
