Idis ID391H, User Manual

Page: 52 / 98

User’s Manual
44
– Detect Flare:
The DVR checks the brightness of the lens and considers the flare on the images as a video loss
event (for example, light is flashed at the lens). Set the flare level by holding down and dragging the pointer. The
higher the percentage, the more sensitive it is.
Alarm In
You can set up alarm in event.

Enable all :
Click Enable all to select all of the camera numbers.

1 to 32: Displays alarm in device number. Clicking each button allows you to change alarm in event settings for
each camera. or buttons are supported for 32-Channel model only.

Enable: Enables alarm in event function. When the DVR detects alarm in from the device connected to the
DVR’s alarm in port, it considers it as an event.

Set up alarm in – Description: Enter an alarm in device name.

Alarm in type:
Enter a signal type of the alarm in device. If the signal type of the alarm in device is NC (Normally
Closed), select Normally open . If the signal type is NO (Normally Open), select Normally closed .
User Define Alarm In
You can set up user define alarm in event.

Enable all :
Click Enable all to select all of the camera numbers.

1 to 32: Displays network alarm in device number. Clicking each button allows you to change network alarm in
event settings for each camera. or buttons are supported for 32-Channel model only.

Enable:
Enables user define alarm in event function. When the DVR detects user define alarm in from
external, it considers it as an event.

Set up user define alarm in – Description:
Enter a user define alarm in device name.

Use Remote Port: Detects the user define alarm in via remote port.

Port: Enter the port number of the device connected to the DVR via TCP networking.