Idis ID391H User Manual Download

Page: 28 / 98

User’s Manual

Archive

You can back up recorded video to a hard disk drive and eSATA.

NOTE:

Use a hard disk drive formatted beforehand when you back up data to hard disk drives.



Archive method:

Manual and automatic archives are supported.

– Archive status:

Displays backup status.

– Manual Archive:

Set the date and time period of recorded video to back up. Clicking the

Start

button starts

backup manually.

–

Automatic Archive:

Starts backup automatically at the predefined time.



Set up Archive storage:

Click the

Set up...

button and set up the storage for archiving. Enabling

Overwrite

makes

the DVR continue recording when the hard disk drive is full by overwriting the oldest video. Disabling

Overwrite

makes the DVR stop recording when the hard disk drive is full.

– Storage List:

Displays a list of connected storage devices that is available for archiving.



Drive:

Displays a name of the device.

NOTE:

It supports Physical Drive that is not initialized. Physical Drive is displayed as “Physical[hdd(number)].” It is

possible to either assign available storage entirely or not to assign. Physical Drive exists in storage device but the

one that is already assigned as an archive is not displayed in recording setup.

Summary of Contents for ID391H



































































































Search results

Summary of Contents for ID391H

Reviews:

Related manuals for ID391H

Brands by name

Popular brands

Idis ID391H, User Manual

Search results

Summary of Contents for ID391H

Reviews:

Related manuals for ID391H

Brands by name

Popular brands