User’s Manual
26
CH.:
Displays a camera number.
Name:
Displays a camera name set in the DVR.
IP address:
Displays a camera’s IP address (supported for a network camera only).
MAC Address:
Displays a camera’s MAC address (supported for a network camera only).
Device Name:
Displays a camera name set in the camera (supported for a network camera only).
Video input type:
Displays a camera’s video input type.
Assign camera
It allows you to register network cameras. This is supported for hybrid products only.
CH.:
Displays a camera number.
Device Name:
Displays a camera name set in the camera.
Model:
Displays a camera model name.
IP address:
Displays a camera’s IP address.
Maximum resolution:
Displays the maximum resolution of a camera.
Version:
Displays the camera firmware version.
(Move):
Allows you to change the camera number by selecting a camera from the list and clicking the
button.
Remove, Remove All:
Cancels the registration of the selected camera by selecting a camera from the list and
clicking the
Remove
button. Clicking the
Remove All
button cancels the registration of all cameras in the list.
NOTE:
High resolution connection is limited to Full HD (1920x1080) at most.
NOTE:
16-channel model is limited to 8 cameras and 32-channel model is limited to 12 cameras for registration.
Summary of Contents for ID391H
