Digital Video Recorder
23
Setting Up the Camera
Non-Hybrid Model
Channel 1
to
Channel 32:
Indicates the camera number.
or
buttons are supported for 32-channel
model only.
−
Description:
Enter a camera name.
Hide Image:
Hides the image of the selected camera on the monitor. The selected camera will not be displayed
on the monitor, however, the images from the camera will be recorded while in the record mode.
PTZ Setup:
Click the
Set up...
button if the camera is a PTZ camera.
– Device ID:
Set the device ID number using the slide bar.
– COM port:
Select the COM port to use. When using the RS232 port,
select
COM 1
. When using the RS485 port, select the given COM
port number. To check the given COM port number, please refer to
the installed card information displayed on the
About
dialog box by
clicking the
(Menu) button of SmartGuard.
– Baud rate
,
Parity
,
Data bit
,
Stop bit:
Set the baud rate, parity, data
bit and stop bit.
Summary of Contents for ID391H
