Idis ID391H, User Manual

Page: 49 / 98

Digital Video Recorder
41
– Email:
Sends an email when an event occurs. Select a sender and recipient from the drop-down menu below
the Set up... button and enter the message. Enabling Attach the event image file attaches an event detected
image file (.JPG) to the email. Clicking the
Set up...
button loads the email address book set at the
ALERT –
Email menu.
– Callback:
Sends a message to predefined callback servers when an event occurs (not supported for network
alarm in events). Select a callback server from the drop-down menu below the
Set up...
button. Clicking the
Set up... button loads the callback address book set at the ALERT – Callback menu.
– Push:
Sends a message to predefined push serves when an event occurs. Select an ignore time from the
drop-down menu below the Set up... button. Clicking the Set up... button loads the push server settings from
the ALERT – Push menu.
– Event monitoring: Displays all the camera channels associated with the channels that an event occurs during
the dwell time on the monitoring screen.
– Move to preset: Clicking the Set up... button displays the list of saved Preset and you can select a Preset.
The PTZ camera moves to the position of the selected Preset when an event occurs. You can save Preset in the
PTZ control panel of SmartGuard. This function is supported for the camera that supports the PTZ function.
– Alarm association: Activates selected alarm out when an event occurs.
– User define alarm out association:
Activates selected user define alarm out when an event occurs.
– NetCam alarm association: Activates selected network camera’s alarm out when an event occurs (supported
for the hybrid model only).
Motion
You can set up motion detection event.

Enable all :
Click Enable all to select all of the camera numbers.

1 to 32: Displays camera number. Clicking each button allows you to change motion detection event settings for
each camera. or buttons are supported for 32-Channel model only.

Enable:
Enables motion detection event function. When the DVR detects a motion in a configured motion
detection zone, it considers the motion as an event.