Idis ID391H, User Manual

Page: 35 / 98

Digital Video Recorder
27
Scan network camera:
Allows you to search for network cameras.
– Protocol: Select the protocol or manufacturer of the device to scan.
– Scan mode:
Select the scan mode. Clicking the
Start scan
button displays the results in the list. If the IP address
range of the camera is different from that of the DVR, the DVR considers the IP address invalid. In this case, you
must change the camera’s IP address to register the camera.

Auto Scan (LAN) : Lists cameras in a LAN environment. If the camera uses the ONVIF
TM
Conformance
protocol, it is recommended that the camera not be networked via DHCP (Dynamic Host Configuration
Protocol). If the camera is networked via DHCP, connection to the camera may not be made properly
depending on changes in the external network environment.

IP Address
: Searches for a camera with a camera’s IP address. Enter the IP address and port number in the
IP
address range and Port fields. It is possible to search more than one camera at a time by entering a range of
IP addresses. It is recommended that the camera not be networked via DHCP (Dynamic Host Configuration
Protocol). If the camera is networked via DHCP, connection to the camera may not be made properly depending
on changes in the external network environment.

FEN : Searches for a camera with a FEN name. Enter the camera’s FEN name registered on a FEN server if
the camera uses the FEN function. Ensure the FEN server information on which the camera is registered is
correct (
SYSTEM – Network menu
→
FEN Server info. settings). If the FEN server information is not
correct, the camera will not be found.