15
MANAGEMENT
15-6
Management Tools screen
Management > Management Tools
■
If you cannot access the setting screen
Access Telnet or SSH (Example:192.168.0.1).
•See the INSTALLATION GUIDE Section 6 for details.
•Set to default, the RoIP Gateway can not be accessed from a Telnet client because the Telnet setting is set to
“Disable.”(Management > Management Tools > Telnet/SSH > Telnet) (See page 15-7.)
After entering “VE-PG4>,” enter the letters written in bold as follows, and then press [Enter].
1. Enter “
network http enabled on
,” and then press [Enter].
2. Enter “
save
,” and then press [Enter].
•The setting is applied.
3. Check if you can access the setting screen.
