7
CONNECTION PORT SETTINgS
7-31
EXT I/O (EXT) screen
Connection Port Settings > EXT I/O (EXT)
■
PTT Control Setting
These items are displayed when “Transceiver” is selected as a connected unit (except for the Transceiver
Model is set to “IC-SAT100.”)
(Connection Port Settings > EXT I/O (EXT) > EXT I/O Port Mode > EXT I/O 1 ~ 4 > Connected Unit)
(Connection Port Settings > EXT I/O (EXT) > EXT I/O > EXT I/O Port)
Edit the PTT control settings.
1
Attack Time
Set the TX Attack time to between 5 and 500 milliseconds. It is the
delay time before the VOX switch turns ON after an audio signal is
received through the network.
(Default: 50)
2
Release Time
Set the RX Delay time. It is the delay time for the VOX switch to turn
OFF after no audio signal is received through the network.
(Default: 500)
L
When the PTT Control in [Transceiver Control] is set to “RTP,” the default
value is “200.”
• Range: 5 ~ 2000 (milliseconds)
3
Voice Delay
Enter the amount of time to store the audio, in 5 millisecond steps.
(Default: 200)
L
When the PTT Control in [Transceiver Control] is set to “RTP,” the default
value is “300.”
• Range: 0 ~ 1500 (milliseconds)
4
VOX Threshold
Enter the voice threshold level.
(Default: 40)
• Range: 0 ~ 100 (%)
3
4
1
2
L
1
and
4
are displayed only when Connection Unit is set to “Transceiver,” Transceiver Model is set to “general
Setting,” and PTT Control is set to “VOX.”
L
2
and
3
are displayed only when Connection Unit is set to “Transceiver.”
