6
TRANSCEIvER CoNTRoLLER
6-62
ID List screen
■
ID List Common Settings
Select an ID list that the IP100Hs will use.
L
You can individually specify an ID list to the groups that the IP100Hs belong to in [Profile] on the [Common Settings]
screen.
L
If any entries on this screen have been changed, you must reboot the IP100H.
■
ID List Advanced Settings
Enter the group name that is selected in [ID List Common Settings].
Transceiver Controller > Common Settings > ID List
Transceiver Controller > Common Settings > ID List
ID List Common Setting Number
Select the group number between 1 and 50, and then enter IDs that the
IP100Hs will use.
L
When the group name or IDs are registered in the group, they are displayed
as shown below.
1
Name ����������
Enter a group name of up to 31 characters.
The group is selected in [ID List Common Setting] on the [ID List]
screen.
When the group is selected on the [ID List] and [Profile] screens, the
group name is displayed.
2
<Apply> ��������
Click to apply the entries.
3
<Reset> ��������
Click to reset the settings.
L
You cannot reset after clicking <Apply>.
1
2
3
