5
BRidgE ConnECtion SEttingS
5-16
SelCall in Bridge Connection screen
Bridge Connection Settings > SelCall in Bridge Connection
1
Index ����������
the index assigned for entry.
Setting range: 1 ~ 1000
2
Name ����������
Enter a name of up to 31 characters.
3
Call Type ��������
Select the type of call.
•
Individual
: Call only a specified radio.
•
Group
:
Call all transceivers that belong to the specified group.
•
All
:
Call all transceivers.
4
Prefix ID ��������
Enter the prefix id of the SelCall destination.
id range: (depending on the system mode)
5
Destination ID ������
Enter the id of the SelCall destination.
id range: (depending on the system mode)
Destination SelCall in Bridge Connection
6
Address ��������
Enter the RoiP gateway’s iP address which is connected to the
transceiver that will communicate with the SelCall destination.
7
Port Number ������
Enter the RoiP gateway’s port number which is connected to the
transceiver that will communicate with the SelCall destination.
8
<Add> ���������
Click to add a SelCall rule to the List of Rule Settings for SelCall in
Bridge Connection.
1
2
3
4
5
6
7
8
■
Rule Settings for SelCall in Bridge Connection
Sets the rules to make a individual call from a digital transceiver that is connected to the RoiP gateway, through a
Bridge Connection.
