8
DESTINATIoN SETTINGS
8-20
Destination Settings screen
Destination Settings > Destination Settings
■
Destination Settings (Individual)
1
2
3
4
5
6
7
This is an example of setting “Individual” as the Call Type
(
3
)
.
5
Additional Controller/IP Transceiver
Controller/Connection Port �
Select the communication devices or the path.
•
None
•
Additional Controller*¹
•
IP Transceiver Controller*²
•
Digital Transceiver1 (D-TRX1) ~ Digital Transceiver4 (D-TRX4)
•
EXT I/O1 (EXT1) ~ EXT I/O4 (EXT4)*³
•
Emergency Notifi cation
•
Microphone (MIC)
•
RoIP Gateway1 ~ RoIP Gateway8
*¹ The registered additional Controllers are displayed.
*² Displayed when an IP Transceiver Controller is connected.
*³ When [Connected Unit] is set to “EXT I/o Unit” and [EXT I/o Port
Mode] is set to “Separate” in the [EXT I/o Port Mode] setting
(Connection Port Settings > EXT I/o (EXT) > EXT I/o Port Mode),
“EXT Input” and “EXT output” are displayed.
L
When a speaker microphone is connected to the [MIC] port, the audio input/
output of the [EXT1] port is disconnected.
The Audio input/output of the [MIC] port and the [EXT1] port cannot be used
at the same time.
6
<Apply> ��������
Click to apply the entries.
L
The registered contents are displayed in [List of Destination Setting Entries
(Individual Call)].
7
<Reset> ��������
Click to reset the settings.
L
You cannot reset after clicking <Apply>.
