13
PBX EXTEnSIon
13-64
Converter Bridge screen
PBX Extension > Converter Bridge
■
Communication
The settings to communicate between the RoIP gateway and a converter bridge connection destination.
2
3
4
5
6
1
L
The screen shows when both Encryption and Talkback are enabled.
1
Encryption �������
Select “Enable” to encrypt the communication.
(Default: Disable)
When you select “Enable,” enter the appropriate key in “Encryption
Key.”
• Range: 1 ~ 32767
L
This setting takes effect when the AMBE+2 codec is used.
2
TalkBack ��������
Commonly used by the transceivers that belong to a group set in the
RoIP Gatway. Set the period of time from when the transceiver finishes
transmitting until the screen returns to the standby mode. (Default: 5)
• Range: 1 ~ 10 (seconds)
3
Call Type ��������
Set the call type to send from a SIP phone to a transceiver that belongs
to the Converter Bridge connection destination.
(Default: Group)
• options: Individual, Group, or All
4
Dstination Prefix ID ���
Enter the prefix ID of the destination.
(Default: Blank)
• Range: Blank or 0 ~ 30
L
The range differs, depending on the system settings
5
Destination ID ������
Does not displayed when the Call Type (
3
) is set to “All.”
Enter an Individual ID or Group ID of the destination transceiver, that is
entered into the Converter Bridge connection destination. (Default: 1)
•
Range: When the Prefix is not set: 1 ~ 9999999
When the Prefix is set:
1 ~ 99999
6
Source ID ��������
Enter an Individual ID or Group ID of the caller.
This ID will be announced at the call destination.
(Default: 1)
• Range: 1 ~ 9999999
