8
DESTINATIoN SETTINGS
8-15
Destination Settings screen
Destination Settings > Destination Settings
■
Destination Settings (Talkgroup)
1
2
3
4
5
6
7
8
This is an example of setting “Talkgroup” as the Call Type
(
3
)
, and “Appointment” as the Callee ID for
IP100FS
(
8
)
.
6
Communication Type ��
Select “Simplex” or “Full-Duplex.”
(Default: Full-Duplex)
•
Simplex operation
L
When “Simplex” is selected, the called station cannot reply until the caller
station stops transmitting.
7
Talkgroup Call for IP100FS �
Select whether or not the Talkgroup Call includes the IP100FS.
(Default: Enable)
8
Callee ID for IP100FS ��
Select the IP100FS to be called when “Enable” is selected in [Talkgroup
Call for IP100FS]
(
7
)
.
(Default: All)
L
When “Appointment” is selected, you can register up to 5 IP100FS’s
destination IDs (4digits).
L
This item is not displayed when “Disabled” is selected in [Talkgroup Call for
IP100FS] (
7
).
L
In the Multiplex Talkgroup, the settings for the IP100FS must be the same for
all the Talkgroups.
Simplex operation
When “Simplex” is selected, the called station cannot reply until the caller station stops transmitting.
VE-PG4
Wireless access point
(Example: AP-95M)
IP100FS
(Remote Communicator)
IP100H
VE-PG4
Wireless access point
(Example: AP-95M)
IP100FS
(Remote Communicator)
Full-Duplex operation
IP100H
•
Full-Duplex operation
