7
CONNECTION PORT SETTINgS
7-14
Digital Transceiver (D-TRX) screen
Connection Port Settings > Digital Transceiver (D-TRX)
■
Digital Transceiver Connection
System: dPMR Mode 2
3
11
12
10
9
8
7
6
5
4
1
2
L
The above screen shows an example for connecting the IC-FR5000 (with UC-FR5000 installed) to the Digital
transceiver 1 (D-TRX1).
L
The above screen shows when the Digital Frame Packet (
5
) and Scrambler (
11
) are set to “enabled,” and Specify
TX CC (
10
) is checked.
11
Scrambler
Check to enable the Scrambler function .
(Default: Disable)
When checked, enter a scrambler key between 1 and 32767. (Default: 1)
12
Connection Status
Click to connect or disconnect the transceiver, or to refresh the
connection status.
L
The buttons are grayed out when Connected Repeater’s Address is blank.
L
The settings cannot be changed while connection is established. Click
<Disconnect> before changing the settings on this screen.
