6
TRANSCEIvER CoNTRoLLER
6-9
Additional Controller Link screen
■
Link Setting
This is a setting to link with IP1000Cs, VE-PG3s (Bridge mode), or VE-PG4s.
Transceiver Controller > RoIP Server Settings > Additional Controller Link
1
No. �����������
Select a number between 1 and 100 to register the
other transceiver
controllers
.
(Default: 1)
2
Name ����������
Enter the group name of up to 31 characters.
3
Destination Address ���
Enter the destination device’s IP address or domain name of up to 63
characters.
4
Destination Port Number �
Enter the destination controller’s service port number in [Additional
Controller Link].
(Default: 32000)
Range: “2” ~ “65534” (only even numbers)
L
The set port number (RTP) and the port 1 (RTCP) are used for
communication.
5
<Apply> ��������
Click to apply the entries.
L
The entries are displayed in [Linked Controller List].
6
<Reset> ��������
Click to reset the settings.
L
You cannot reset after clicking <Apply>.
1
2
3
4
5
6
