![background image](http://html1.mh-extra.com/html/icom/id-e880/id-e880_instruction-manual_3785265058.webp)
40
4
DV MODE PROGRAMMING
New2001
New2001
®
Gateway repeater call sign programming (GW CAL)
q
Push
[ ]
(MONI) to enter the gateway repeater call sign
programming.
• Gateway repeater call sign programming screen is displayed.
• Programmed repeater call sign is displayed, then the 1st char-
acter blinks.
• The 8th digit is automatically added or replaced to “G.”
w
Rotate
[DIAL]
to select the desired character, number,
symbol (‘/’ only) or space.
• The selected character blinks.
• Push
[
u
]
(LOW)
to move the cursor right; push
[
t
]
(CS) to move
the cursor left.
• Push
[CLR]
(DR) to erase the selected character, or push and
hold
[CLR]
(DR) for 1 sec. to erase all characters following the
cursor.
e
Repeat step
w
until the desired repeater call sign is pro-
grammed.
• Call sign can be up to 8 digits long, but 8th digit must be set to “G.”
r
Push
[ ]
(MONI) to program the gateway repeater call
sign and exit the state.
■
Changing a repeater list
This function re-programs a repeater list’s contents. This is
useful when already-programmed contents are mistaken or
some contents are added to the list.
q
Enter “EDIT-L” in RPT-L menu.
MENU
➪
RPT-L
➪
EDIT-L
(Push
[MENU
]
), (rotate
[DIAL]
, then push
[ ]
(MONI).)
• Programmed repeater name appears.
SKIP indicator
SKIP indicator shows the selected repeater can not be used
for access repeater (RPT1) in DR mode as follow reasons.
• “R1 USE” is set to “NO.”
• Either “FREQ” (frequency) or “DUP” (duplex direction)
has not been programmed.
w
Push and hold
[BAND]
for 1 sec. to enter group selection,
rotate
[DIAL]
to select the desired group (0–9), then push
[BAND]
.
Summary of Contents for ID-E880
Page 194: ...176 MEMO...
Page 195: ...177 MEMO...