manualshive.com logo in svg

Icom ID-E880, Instruction Manual

Share
Download
Icom ID-E880 Instruction Manual Download Page 147

129

10

MENU SCREEN OPERATION

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

D

 Mic UP/DN 

 / 

Sets the assigning function to the 
[UP]/[DN] keys on the optional HM-103/HM-154.

Assignable functions:

UP* (default)

DOWN

†

 (default)

MENU (as [MENU 

])

DR (as [DR])

SMW (as [S.MW MW])

CS (as [CS])

BAND (as [BAND MODE])

LOW (as [LOW])

V/MHZ (as [VFO/MHz])

MONI (as [MONI])

M/CALL (as [M/CALL])

*Available for “MIC-UP” only; 

†

Available for “MIC-DN” only

D

 Packet speed 

Selects the data transmission speed for packet operation 
from 1200 bps (default) and 9600 bps.

D

 Data speed 

Selects the data speed of [DATA] jack between 4800 bps 
and 9600 bps 

(default)

 for low-speed data communication in 

the DV mode or GPS receiving.

  

This setting does not change the cloning speed.

D

 Auto power OFF 

The transceiver can automatically turn itself OFF after a spec-
ified time period. Activating any control restarts the time-out 
period. The transceiver beeps before it turns OFF.

30 min., 60 min, 90 min, 120 min and OFF 

(default)

 can be 

specified. The specified time period is retained even when 
the transceiver is turned OFF by the auto power OFF func-
tion. To cancel the function, select “OFF” in this item.

Summary of Contents for ID-E880





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands