manualshive.com logo in svg

Icom ID-E880, Instruction Manual

Share
Download
Icom ID-E880 Instruction Manual Download Page 184

166

OPTIONS

16

CS-80/880

 

CLONING

 

SOFTWARE

 

(free download)

Use this software to program settings such as memory chan-
nels and set mode contents quickly and easily via your PC’s 
RS-232C terminal (using OPC-1529R or OPC-478), or USB 
port (OPC-478UC). Either OPC-1529R, OPC-478 or OPC-
478UC is required. 
This software can be downloaded from the Icom home page 
via the Internet. Access the following URL to download the 
software and the manual.
 http://www.icom.co.jp/world/support/index.html

HM-133 

REMOTE

-

CONTROL

 

MICROPHONE

Remote control microphone with key backlight. Same as that 
supplied with the transceiver.

HM-103/HM-154 

HAND

 

MICROPHONE

OPC-347/1132

 

DC

 

POWER

 

CABLES

OPC-347  : 7.0 m
OPC-1132 :  3.0 m  

Same as that supplied with the transceiver.

OPC-440/647

 

MIC

 

EXTENSION

 

CABLE

OPC-440: 5.0 m
OPC-647: 2.5 m

OPC-441

 

SPEAKER

 

EXTENSION

 

CABLE

5.0 m

OPC-474

 

CLONING

 

CABLE

Used for data cloning between transceivers.

OPC-478/OPC-478UC

 

CLONING

 

CABLE

Used for data cloning between transceiver and PC with CS-
80/880 (free download software).
OPC-478 

: RS-232C type

OPC-478UC  : USB type

OPC-589

 

MIC

 

ADAPTOR

 

CABLE

Allows you to connect a regular 8-pin microphone.

OPC-1529R 

DATA

 

COMMUNICATION

 

CABLE

 (RS-232C type)

Allows low-speed data communication in the DV mode and 
data cloning operation with CS-80/880 (free download soft-
ware).

SP-10 

EXTERNAL

 

SPEAKERS

For all-round mobile operation. Cable length: 1.5 m

MB-120 

MOUNTING

 

BASE

Mounts the remote controller on to variety of place in vihicle. 
Remote controller bracket is required for mounting.

Summary of Contents for ID-E880





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands