![background image](http://html1.mh-extra.com/html/icom/id-e880/id-e880_instruction-manual_3785265056.webp)
38
4
DV MODE PROGRAMMING
Duplex direction setting (DUP)
This content appears when R1 USE is selected YES.
@4
Push
[
]
(MONI) to enter the duplex direction setting
state.
• Duplex direction setting screen is displayed.
@5
Rotate
[DIAL]
to select the duplex direction.
@6
Push
[
]
(MONI) to set the duplex direction and exit the
state.
@7
Rotate
[DIAL]
to select the next content (frequency offset
programming).
Frequency offset programming (OFF SET)
This content appears when R1 USE is selected YES.
@8
Push
[
]
(MONI) to enter the offset frequency program-
ming state.
• Frequency offset programming screen is displayed.
@9
Rotate
[DIAL]
to select the frequency offset.
• The selected number blinks.
• Push
[
]
(LOW)
to move the cursor right; push
[
]
(CS) to move
the cursor left.
• Push and hold
[CLR]
(DR) for 1 sec. to clear the displayed fre-
quency.
#0
Push
[
]
(MONI) to set the frequency offset and exit the
state.
Storing the repeater list (ADD W)
#1
Rotate
[DIAL]
to select the store operation.
#2
Push
[
]
(MONI) to enter storing state.
• “ADD W
OK?
” appears.
#3
Push
[
]
(MONI) again to store the list.
Summary of Contents for ID-E880
Page 194: ...176 MEMO...
Page 195: ...177 MEMO...