![background image](http://html1.mh-extra.com/html/icom/id-e880/id-e880_instruction-manual_3785265109.webp)
MW
The microphone can also be used to program mem-
ory channels.
z
Set the desired frequency in the VFO mode.
±
Push [VFO/LOCK] to select the VFO mode.
±
Push [
ENT
C(T-OFF)], then set the frequency using the
keypad.
±
Set other data (e.g. frequency offset, duplex direction,
tone squelch, current call signs, etc.), if desired.
x
Push [MR/CALL] to enter the memory mode.
c
Push [
ENT
C(T-OFF)], then set the desired memory chan-
nel using the keypad.
v
Push [VFO/LOCK] to select the VFO mode.
b
Push [FUNC] then push and hold [
CLR
A(MW)] for 1 sec.
to program.
±
3 beeps may sound and the VFO contents
(including the
subaudible tone frequency, etc.)
are programmed.
±
Memory channel number increases when continuing to
push [
CLR
A(MW)] after programming.
D
Programming a memory channel via the microphone
Push ,
Push then for 1 sec. and continue to push
MR/
CALL
Push then
Push
Push
[EXAMPLE]:
Programming 145.870 MHz into memory channel 20 (blank channel).
91
7
MEMORY/CALL CHANNELS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Summary of Contents for ID-E880
Page 194: ...176 MEMO...
Page 195: ...177 MEMO...