![background image](http://html1.mh-extra.com/html/icom/id-e880/id-e880_instruction-manual_3785265090.webp)
72
5
DV MODE OPERATION
D
DV auto detect
The “DV” mode indicator and “FM” mode indicator blink when
a non-DV signal is received during DV mode operation.
When a signal other than the DV mode is received, the ID-
E880 DV automatic detection switches to monitor in the FM
mode.
q
Enter “DV DET” in DV SET mode.
MENU
¶
DV SET
¶
DV DET
(p. 135)
(Push
[MENU
]
), (rotate
[DIAL]
, then push
[
]
(MONI).)
w
Rotate
[DIAL]
to turn the DV automatic detect function ON
or OFF.
OFF
:
“DV” blinks then “FM” also blinks, but the trans-
ceiver receives in the DV mode even if non-DV
mode signals are received.
ON
:
“DV” blinks then “FM” also blinks, when the trans-
ceiver monitors the receiving signal in other than
DV mode, the signal is in FM mode.
e
Push
[
]
(MONI) to return to DV SET mode.
r
Push
[MENU
]
to return to frequency indication.
NOTE:
The received FM audio may be distorted when
receiving an FM signal with DV automatic detect function.
D
Packet loss indication
While operating voice communication or low-speed data com-
munication via the internet network from one zone to another
zone, some packets may be lost due to network error (poor
data throughput performance). In such a case, the ID-E880
displays “P-LOSS” instead of frequency indication on the dis-
play to indicate Packet Loss has occurred.
Appears
N
Other functions in the DV mode
Summary of Contents for ID-E880
Page 194: ...176 MEMO...
Page 195: ...177 MEMO...