![background image](http://html1.mh-extra.com/html/icom/id-e880/id-e880_instruction-manual_3785265130.webp)
112
9
PRIORITY WATCH
N
Priority watch operation
D
Memory/call channel and memory scan watch
q
Select the VFO mode; then, set an operating frequency.
w
Select the channel(s) to be watched.
For memory channel watch:
Select the desired memory channel.
For call channel watch:
Select the desired call channel.
For memory scan watch:
±
Select the memory mode, or the desired bank group.
±
Push and hold
[SCAN]
(VFO/MHz) for 1 sec. to enter
the scan type selection.
±
Rotate
[DIAL]
to select the desired scan type, then
push
[SCAN]
(VFO/MHz) again to start memory/bank
scan.
e
Enter “PRIO” in SCAN set mode.
MENU
¶
SCAN
¶
PRIO
(p. 123)
(Push
[MENU
]
), (rotate
[DIAL]
, then push
[
]
(MONI).)
r
Rotate
[DIAL]
to select “ON.”
•
Select “BELL” if the priority beep function is desired.
t
Push
[MENU
]
to exit SCAN set mode and start the
watch.
• “PRIO” indicator appears.
• The transceiver checks the memory/bank channel(s) or call
channel every 5 sec.
• The watch resumes according to the selected scan resume con-
dition. (p. 109)
y
Push
[MENU
]
to cancel the watch.
Monitors VFO frequency
for 5 sec.
Pauses on a memory
or call channel when
a signal is received.
• During priority watch
Emits beep and blinks “
S
” indicator when a signal is
received on a memory or call channel.
• During priority watch with priority beep
Summary of Contents for ID-E880
Page 194: ...176 MEMO...
Page 195: ...177 MEMO...