![background image](http://html1.mh-extra.com/html/icom/id-e880/id-e880_instruction-manual_3785265086.webp)
68
5
DV MODE OPERATION
N
Break-in communication
The break-in function allows you to break into a conversa-
tion, where the two original stations are communicating with
call sign squelch enabled.
q
While receiving an another station’s communication, push
and hold
[RX
©
CS]
(CS) for 1 sec. to set the communicating
station’s call sign.
• When a call sign has not been received correctly, error beeps
sound and no call sign is set. Try to set the call sign of a com-
municating signal again, or set the call sign manually.
w
Enter “BK” in DV SET mode.
MENU
¶
DV SET
¶
BK
(Push
[MENU
]
), (rotate
[DIAL]
, then push
[
]
(MONI).)
• BK screen is displayed.
e
Rotate
[DIAL]
to turn the Break-in function ON or OFF.
• When "ON" is selected, “BK” appears instead of memory chan-
nel indication
r
Push
[
]
(MONI).
• Returns to DV SET mode.
t
Push
[MENU
]
to return to frequency indication.
“BK” appears
y
When both stations are in standby, push
[PTT]
to transmit
a break-in call.
• The programmed call sign station receives the break-in call as
well as your call sign.
u
Wait for the reply call from the station who receives the
break-in call.
i
After receiving the reply call, communicate normally.
o
To cancel the break-in function, turn the Break-in function
OFF in the DV SET mode as steps
w
to
t
.
NOTE:
The break-in function is turned OFF automatically
when turning transceiver’s power OFF.
Summary of Contents for ID-E880
Page 194: ...176 MEMO...
Page 195: ...177 MEMO...