Icom ID-E880, Instruction Manual

Page: 74 / 196

56
5
DV MODE OPERATION
N
Simplex operation in the VFO
D
Sending CQ
q
Set the desired frequency. (pgs. 14, 15)
• Select output power, if desired. (p. 18)
w
Set the current MY call sign to your own call sign. (p. 42)
e
Set the current UR call sign. (p. 42)
UR call sign selection
q
Push and hold [UR] (DR) for 1 sec. to enter UR call
sign selection mode.
• Push [BAND] several times to select “GRP CQ” (CQCQCQ)
“GRP UR” (UR call sign memories) and “CS” (current call
sign).
• The DV mode is automatically selected.
w
Rotate [DIAL] to select “CQCQCQ.”
[UR] [BAND] [DIAL]
e
Push [UR] (DR) to return to frequency indication mode.
r
Push and hold [PTT] to transmit and speak into the micro-
phone at normal voice level.
• “
$
” appears and the RF meter shows the output power.
• “CQCQCQ” is displayed and scrolled in sequence on the fre-
quency display depending on “TX CS” setting (p. 136).
t
Release [PTT] to return to receive.
• The other station’s call sign will be received.
• Received call signs can be stored into the received call record
automatically. See page 44 for details.
• Current call sign setting example (Simplex CQ)
UR MY
R1: NOT USE R2: NOT USE
MY call sign ：
JA3YUA
CQ
Confirmation
q
Push [CS] to enter the current call sign mode.
• Current UR call sign is displayed.
w
Rotate [DIAL] to select and confirm the other current call
sign.
• (“UR”), “R1,” “R2” and “MY” appears in sequence.