![background image](http://html1.mh-extra.com/html/icom/id-e880/id-e880_instruction-manual_3785265015.webp)
VIII
QUICK REFERENCE GUIDE
N
Your first contact
Now that you have your ID-E880 installed in your car or
shack, you are probably anxious to get on the air. We would
like to take you through a few basic operation steps to make
your first time “On The Air” an enjoyable experience.
1. Turning ON the transceiver
Before powering up your ID-E880, you may want to make
sure the audio volume and squelch level controls are set in
9–10 o’clock positions.
[SQL]
[VOL]
Although you have purchased a brand new transceiver, some
settings may be changed from the factory defaults because
of the Quality Control (QC) process. Resetting the CPU is
necessary to start from factory default.
[VFO/MHz]
Partial re
s
et
[S.MW]
±
While pushing and holding
[S.MW]
and
[VFO/MHz]
keys,
push and hold
[
]
for 1 sec. to reset the CPU.
2. Selecting the operating frequency band
The ID-E880 can use the 2 m or 70 cm amateur bands.
[BAND]
[DIAL]
Frequency band initial is displayed.
±
Push
[BAND]
then rotate
[DIAL]
to select the desired fre-
quency band.
• Push
[BAND]
again to return to the frequency indication.
Using the HM-133
You can select the desired frequency band from the HM-133.
Push
Push
• 144 MHz band
• 400 MHz band
Q
UICK REFERENCE
Summary of Contents for ID-E880
Page 194: ...176 MEMO...
Page 195: ...177 MEMO...