![background image](http://html1.mh-extra.com/html/icom/id-e880/id-e880_instruction-manual_3785265108.webp)
7
MEMORY/CALL CHANNELS
N
Memory channel programming
q
Push
[VFO/MHz]
to select the VFO mode.
w
Set the desired frequency:
±
Select the desired band with
[BAND]
.
±
Set the desired frequency with
[DIAL]
.
±
Set other data (e.g. frequency offset, duplex direction,
tone squelch, current call signs, etc.), if desired.
e
Push
[S.MW]
to enter the select memory write mode.
• “
X
” indicator and the memory channel number blink.
r
Rotate
[DIAL]
to select the desired channel.
• Call channels (C0, C1), VFO and scan edge channels (0A/0B
to 24A/24B), as well as regular memory channels, can be pro-
grammed in this way.
t
Push and hold
[MW]
(S.MW) for 1 sec. to program.
• 3 beeps sound.
• Memory channel number automatically increases when continu-
ing to push
[MW]
(S.MW) after programming.
NOTE:
Push
[MENU
]
to cancel to program and exit the
select memory write mode before memory programming is
finished.
FOR YOUR CONVENIENCE
Memory programming can be performed in various ways e.g.
memory channel to the different memory channel, memory
channel to the call channel, etc.
Push and hold [MW] for 1 sec. to program
[DIAL]
Rotate [DIAL] to select channel 20.
VFO mode
Enter select memory write mode.
Push [S.MW].
Channel 20
Return to the VFO mode.
[EXAMPLE]:
Programming 145.870 MHz into memory channel 20 (blank channel).
[S.MW ]
90
Summary of Contents for ID-E880
Page 194: ...176 MEMO...
Page 195: ...177 MEMO...