![background image](http://html1.mh-extra.com/html/icom/id-e880/id-e880_instruction-manual_3785265012.webp)
D
Remote installation
The supplied remote controller bracket is used for remote in-
stallation.
These screws
are not supplied.
Remote controller bracket
• Attach the remote controller
bracket onto a flat surface
using 4 self-tapping screws
(2.6 mm(d))
, or double-sticky
tape, etc., as at left, then at-
tach remote controller to the
bracket.
When installing into your vehicle
q
Remove two screws and magnets from the remote controller.
Remote controller
Magnet
FH M2.6 × 6 mm
FH: Flat head
CAUTION: NEVER
use any other than the supplied
screws (FH M2.6 × 6 mm) if re-attaching the magnets to
the remote controller. Otherwise the transceiver’s internal
board may be damaged.
w
Attach the removed magnets to the remote controller
bracket.
Remote controller bracket
Magnet
e
Attach the supplied remote controller bracket as below.
Remote controller bracket (with magnets)
Remote controller
FH M2.6 × 8 mm
FH: Flat head
CAUTION: NEVER
use any other than the supplied
screws (FH M2.6 × 8 mm) for attaching the remote con-
troller bracket. Otherwise the transceiver’s internal board
may be damaged.
r
Attach the remote controller on to the optional MB-120 as
below.
Remote controller bracket
Optional
MB-120
Adjust the viewing
angle for maximum
visibility of the
function display.
V
QUICK REFERENCE GUIDE
Summary of Contents for ID-E880
Page 194: ...176 MEMO...
Page 195: ...177 MEMO...