![background image](http://html1.mh-extra.com/html/icom/id-e880/id-e880_instruction-manual_3785265041.webp)
23
3
REPEATER OPERATION
3
N
Accessing a repeater
q
Set the receive frequency (repeater output frequency).
(pgs. 14, 15)
w
Push and hold
[DUP]
(LOW) for 1 sec. to enter the duplex
setting condition.
e
Rotate
[DIAL]
to select minus duplex or plus duplex.
• “DUP–” or “DUP” appears to indicate the transmit frequency for
minus shift or plus shift, respectively.
• Push
[DUP]
(LOW) again to return to the frequency indication.
[DUP]
“DUP–” or “DUP” appears
r
Push and hold
[TONE]
(M/CALL) for 1 sec. to enter the
tone setting condition.
t
Rotate
[DIAL]
to turn ON the subaudible tone encoder, accord-
ing to repeater requirements, then push
[TONE]
(M/CALL).
• “T” appears
• 88.5 Hz is set as the default; refer to p. 25 for tone frequency
settings.
• When the repeater requires a different tone system, see p. 26.
[TONE]
“T” appears
y
Push and hold
[PTT]
to transmit.
• The displayed frequency automatically changes to the transmit
frequency (repeater input frequency).
• If “OFF” appears, confirm that the frequency offset (p. 27) is set
correctly.
u
Release
[PTT]
to receive.
While receiving
While transmitting
i
Push
[MONI]
to check whether the other station’s transmit
signal can be received directly.
o
To return to simplex operation, push and hold
[DUP]
(LOW)
then rotate
[DIAL]
, to clear the “DUP–” or “DUP” indicator.
• Push
[DUP]
(LOW) again to return to frequency indication.
!0
To turn OFF the subaudible tone encoder, push and hold
[TONE]
(M/CALL) then rotate
[DIAL]
until no tone indicator
(OFF) appears.
• Push
[TONE]
(M/CALL) again to return to frequency indication.
Summary of Contents for ID-E880
Page 194: ...176 MEMO...
Page 195: ...177 MEMO...