60
5
DV MODE OPERATION
D
Calling CQ in the same zone (Zone CQ)
q
Set the desired repeater’s frequency, offset and shift direc-
tion (pgs. 14, 15, 23, 27), then select the DV mode (p. 18).
Your own call sign (step
w
) and station call sign (step
e
)
can also be set as same as repeater call signs in current
call sign mode (step
r
).
w
Set the current MY call sign to your own call sign.
• See pgs. 42, 43 for current call sign setting details.
e
Set the current station call sign as follows:
±
Push and hold
[UR]
(DR) for 1 sec. to enter UR call sign
selection mode.
•
Push
[BAND]
several times to select “GRP CQ,” then “CQC-
QCQ” is selected automatically. Push
[UR]
(DR) again.
r
Set the current repeater’s call sign as follows:
z
Push
[CS]
to enter the current call sign mode.
•
UR call sign is displayed.
•
Push
[M/CALL]
to toggle the call sign and repeater name
indications.
x
Rotate
[DIAL]
to select “R1,” access repeater’s call sign,
then push
[
]
(MONI) to enter the current call sign se-
lection mode.
c
Rotate
[DIAL]
to select the desired access repeater’s
call sign, then push
[
]
(MONI) to set the call sign for
“RPT1.”
• Return to the current call sign mode.
v
Rotate
[DIAL]
to select “R2,” linked repeater’s call sign, then
push
[
]
(MONI) to set the current call sign selection mode.
• “RPT2” call sign screen is displayed.
b
Rotate
[DIAL]
to select the desired repeater call sign in
the same zone, then push
[
]
(MONI).
• Return to the current call sign mode.
n
Push
[MENU
]
to return to frequency indication.
t
Push
[PTT]
to transmit; release to receive.
• “CQCQCQ” is displayed and scrolled in sequence on the fre-
quency display depending on “TX CS” setting (p. 136).
• Current call sign setting example
My call sign
：
JA3YUA
Repeater
q
：
JP3YHL
Repeater
r
：
JP3YHJ
CQ
q
w
e
r
Area
Zone
UR
MY
R1
R2
Pushing and holding
[BAND]
for 1 sec. selects the repeater
group when in selection mode.
Summary of Contents for ID-E880
Page 194: ...176 MEMO...
Page 195: ...177 MEMO...
