![background image](http://html1.mh-extra.com/html/icom/id-e880/id-e880_instruction-manual_3785265133.webp)
115
9
PRIORITY WATCH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D
VFO scan watch via the microphone (Continued)
PRIO
3
n
Push [
SCAN
2(T-SCAN)] to start the VFO scan
watch.
• The transceiver checks the memory/bank channel(s)
or call channel every 5 sec.
• The watch resumes according to the selected scan
resume condition. (p. 109)
m
To stop the watch, push [
CLR
A(MW)].
D
DR mode/VFO watch
q
Select the VFO mode; then, set an operating frequency.
w
Push
[DR]
to enter the DR mode.
e
Select the access repeater to be watched.
For a specific repeater watch:
Select the desired access repeater.
For repeater scan watch:
Push and hold
[SCAN]
(VFO/MHz) for 1 sec. to start the
access repeater scan.
r
Enter “PRIO” in SCAN set mode.
MENU
¶
SCAN
¶
PRIO
(p. 123)
(Push
[MENU
]
), (rotate
[DIAL]
, then push
[
]
(MONI).)
t
Rotate
[DIAL]
to select “ON.”
•
Select “BELL” if the priority beep function is desired.
y
Push
[MENU
]
to exit SCAN set mode and start the
watch.
• “PRIO” indicator appears.
• The transceiver checks the VFO mode every 5 sec.
• The watch resume according to the selected scan resume con-
dition. (p. 109)
u
Push
[VFO/MHz]
to cancel the watch.
Monitors DR mode for 5 sec.
Pauses on a VFO mode
when a signal is received.
• During priority watch
Emits beep and blinks “
S
” indicator when a signal is
received on a VFO mode.
• During priority watch with priority beep
Summary of Contents for ID-E880
Page 194: ...176 MEMO...
Page 195: ...177 MEMO...