![background image](http://html.mh-extra.com/html/icom/ic-705/ic-705_advanced-manual_612188161.webp)
14-15
14. D-STAR OPERATION (ADVANCED)
EMR communication
The Enhanced Monitor Request (EMR)
communication function can be used in only the
DV mode. Using the EMR function, no call sign
setting is necessary.
L
Information
• All transceivers that can receive an EMR signal
automatically open their digital squelch to receive
the signal.
DO NOT
use this function except in the
case of emergency.
• When an EMR signal is received, the audio (voice)
is heard at the set level, even if the volume setting
level is set to the minimum level.
• The EMR communication function is automatically
turned OFF when you turn OFF the transceiver.
Example:
Transmitting from the “Hirano”
repeater using the EMR function.
1. Open the EMR screen.
» SET > DV SET >
EMR
2. Touch “ON.”
3. To close the DV SET screen, push
several times.
• Returns to the standby screen, and “EMR” is
displayed.
4. Hold down [PTT] to transmit.
L
“EMR” blinks on a station that receives the EMR
signal. The audio (voice) is heard at the set
EMR AF Level, or the
control level,
whichever is higher.
L
To cancel the EMR mode, touch “OFF” in step
2, or turn OFF the transceiver.
D
Adjusting the EMR AF level
The audio output level, when an EMR signal is
received, is adjustable between 0 and 100%.
When an EMR signal is received, the audio is
heard at the preset level, or the
control
level, whichever is higher.
To turn OFF the setting, set to “0.”
1. Open the “EMR AF Level” screen.
» SET > DV SET >
EMR AF Level
2. Touch [+] or [–] to adjust the EMR audio
output level between 0% (OFF) and 100%
(maximum). (Default: 50%)
3. To close the “EMR AF Level” screen, push
several times.