7-6
7. MEMORY OPERATION
Memo Pad
There are 5 Memo Pads as the default to save
frequencies and operating modes for easy writing
and recall. You can increase the Memo Pads to
10 in the following item.
» SET > Function >
Memo Pad Quantity
L
The Memo Pads are separate from memory
channels.
Memo Pads are convenient when you want to
temporarily memorize a frequency and operating
mode, such as when you find a DX station in a
pile-up, or when the desired station is busy for
a long time and you want to temporarily look for
other stations.
D
Saving the contents into a Memo Pad
1. Select the VFO mode. (Basic Manual)
2. Set the frequency and operating mode, then
push
for 1 second.
• A beep sounds.
L
When you save up to the set number of Memo
Pads in “Memo Pad Quantity,” the oldest Memo
Pad is automatically cleared for the new Memo
Pad.
NOTE:
Each Memo Pad must have its own
unique contents. The Memo Pads with identical
content cannot be saved.
D
Calling up the Memo Pads
1. Select the VFO mode. (Basic Manual)
2. Push
several times until the desired
Pad is displayed.
L
Pushing
selects the Memo Pads.
L
The calling up starts with the most recently
saved Pad.
D
MEMO PAD screen
The MEMO PAD screen displays the saved
contents in a list, in which you can select or
delete the saved contents.
»
MPAD
Temporary Pad
TIP:
If you change the frequency or operating
mode called up from Memo Pads, the contents
are automatically updated in a temporary Pad.
Key
Action
▲/▼
Scrolls through the list.
DEL
Touch for
1 second Deletes the selected Memo Pad.
DEL ALL Touch for
1 second Deletes all the Memo Pads.
EXPAND Select to display the MEMO PAD list in the
Expanded or Normal screen.
