Icom IC-705 Advanced Manual Download

Page: 123 / 218

12-40

12. GPS OPERATION (ADVANCED)

GPS SET

» GPS > GPS TX Mode >

NMEA

GPS Sentence

(Default: GGA)

Selects sentences to be transmitted in the GPS

mode to transmit position data. The selectable

sentences are RMC, GGA, GLL, VTG, GSA, and

GSV.

NOTE:

Set the GSV sentence to OFF when

sending the GPS message to conventional

digital transceivers. (p. 12-1)

The GSV sentence is incompatible with them.

Information

• Up to 4 GPS sentences can be set at a time.

• Displays “

✓

” when the sentence is set to ON.

• “VTG,” “GSA,” and “GSV” sentences are not

transmitted when your location has been manually

set.

GPS Message

Enter a GPS message of up to 20 alphanumeric

characters. (p. 12-18)

NOTE:

When you do not want to send a

message, delete the entered message.

GPS

GPS Information

Displays the GPS satellite direction, elevation

angle, satellite number, and receiving status.

(p. 12-7)

TIP: Contents of GPS sentence

The Time Stamp is displayed based on the UTC (Universal Time Coordinated) time.

Sentence

Lon/Lat

Alt

GPS Time

Stamp

(UTC)

Date

(UTC)

Status

2D/3D

COG

(True)

SOG

(knot)

RMC

✔

GGA

✔

GLL

✔

VTG

✔

GSA

✔

GSV

Sentence

Others

RMC

Magnetic variation, Mode Indicator

GGA

Number of satellites in use, HDOP, Geoidal separation, Age of Differential GPS data,

Differential reference station ID

GLL

Mode Indicator

VTG

COG (Magnetic north), SOG (km/h), Mode Indicator

GSA

PRN number of satellites used in solution, PDOP, HDOP, VDOP

GSV

Total number of sentences, Sentence number, Total number of satellites in view,

Satellite information (ID, Elevation, Azimuth, S/N)

Summary of Contents for IC-705



























































































































































































































Search results

Summary of Contents for IC-705

Reviews:

Related manuals for IC-705

Brands by name

Popular brands

Icom IC-705, Advanced Manual

Search results

Summary of Contents for IC-705

Reviews:

Related manuals for IC-705

Brands by name

Popular brands