![background image](http://html.mh-extra.com/html/icom/ic-705/ic-705_advanced-manual_612188184.webp)
14-38
14. D-STAR OPERATION (ADVANCED)
Using the RS-MS1A
D
When using the Bluetooth function
This section describes how to connect to the
transceiver from an Android device.
Before connecting, pair the transceiver with an
Android device. (p. 10-5)
Step 1� Preparing for the connection
(Transceiver)
Set “CI-V Transceive” to ON to control the
transceiver and the RS-MS1A with CI-V
commands.
» SET > Connectors > CI-V >
CI-V Transceive
Step 2� Starting the RS-MS1A
(Android device)
Touch the RS-MS1A to start.
L
See page 14-37 for details on downloading the
RS-MS1A.
Step 3� Connecting to the transceiver
(Android device)
Touch the transceiver Bluetooth unit’s name
displayed on the RS-MS1A.
• Starts to connect.
L
When your call sign has not been entered in the
transceiver, you should enter in before you connect.
L
After the connection has succeeded, the transceiver
displays “
MMM
Connected,” and the Bluetooth icon
is displayed.
“
MMM
” is the Bluetooth name of the Android device.
L
On the PAIRING/CONNECT screen, “(Connect)” is
displayed under the Android device name.
NOTE:
If you cannot connect, check that
the same CI-V address is set between the
transceiver and the RS-MS1A.
You can see the CI-V setting as described
below:
Transceiver:
“CI-V Address” in the SET mode. (Default: A4)
» SET > Connectors > CI-V >
CI-V Address
RS-MS1A:
“Application Setting”
“CI-V setting”
(Default: Transceiver[A4])
TIP: To connect to the Android device from
the transceiver:
When the RS-MS1A is started on the Android
device, you can connect to the device from the
transceiver.
1. Open the BLUETOOTH SET screen.
» SET >
Bluetooth Set
2. Touch “Pairing/Connect.”
3. Touch the Android device name displayed in
the pairing list.
4. Touch [YES].
• Displays “
MMM
Connecting...”
( “
MMM
” is the Bluetooth name of the
Android device.)
L
On the PAIRING/CONNECT screen,
“(Connect)” is displayed under the Android
device name.