![background image](http://html.mh-extra.com/html/icom/ic-705/ic-705_advanced-manual_612188157.webp)
14-11
14. D-STAR OPERATION (ADVANCED)
Message operation
You can save up to 5 short messages in the
transceiver’s memory to transmit in the DV mode.
Each message can be up to 20 characters.
D
Entering a TX message
Example:
Entering “JAPAN TOM” into TX
message memory number 1.
1. Open the TX MESSAGE screen.
» SET > My Station >
TX Message
2. Touch a TX message memory number for 1
second.
3. Touch “Edit.”
4. Enter a message of up to 20 characters, then
touch [ENT].
5. To close the TX MESSAGE screen, push
.
D
Transmitting a message
You can transmit a preset TX message by
pushing [PTT] in the DV mode. First, select a
TX message which also turns ON the Message
Transmission function.
1. Open the TX MESSAGE screen.
» SET > My Station >
TX Message
2. Touch a TX message memory number.
L
To not transmit any message, touch “OFF.”
3. To close the TX MESSAGE screen, push
.
L
Information
• The message is transmitted with your voice signal.
• The message is transmitted each time you transmit.
• When continuously transmitting, the selected TX
message is transmitted every 30 seconds.
D
Deleting a TX message
You can delete the TX messages.
Example:
Deleting TX message “JAPAN TOM”
from TX message memory number 1.
1. Open the TX MESSAGE screen.
» SET > My Station >
TX Message
2. Touch a TX message memory number for 1
second.
3. Touch “Clear.”
• The confirmation dialog is displayed.
4. Touch [YES].
• Clears the entered message.
5. To close the TX MESSAGE screen, push
.