12-31
12. GPS OPERATION (ADVANCED)
GPS SET
NOTE:
The default settings shown below are for the USA transceiver version. The default settings may
differ, depending on your transceiver version. To return to your transceiver version’s default settings,
push
and touch “Default.”
» GPS >
GPS Set
GPS Select
(Default: ON)
Selects how to capture position data.
•OFF: A GPS receiver is not used.
•ON:
Position data of the internal GPS
receiver is used for the GPS functions.
•Manual: Manually enter the current Latitude,
Longitude, and Altitude in “Manual
Position.”
» GPS > GPS Set >
GPS Option
SBAS
(Default: ON)
Turns the SBAS (Satellite Based Augmentation
System) function ON or OFF.
L
When turning ON this function, the GPS position
accuracy can be improved, but the transceiver’s
battery is quickly exhausted.
•OFF: Turns OFF the function.
•ON: Turns ON the function.
GLONASS
(Default: ON)
Selects whether or not to use the data from
the GLONASS (GLObal’naya NAvigatsionnaya
Sputnikovaya Sistema) satellites.
L
When turning ON this function, the GPS position
accuracy can be improved, but the transceiver’s
battery is quickly exhausted.
•OFF: Does not use the data from the
GLONASS satellites.
•ON: Uses the data from the GLONASS
satellites.
Power Save
(Default: Auto)
Selects whether or not to use the Power Save
function for the internal GPS receiver.
When this function is ON, and if the GPS receiver
does not receive signals from a satellite for 5
minutes, the function turns OFF the GPS receiver
for this set period of time.
•OFF: The GPS receiver is always turned ON.
•1, 2, 4, 8min:
When the receiver cannot receive signals
from a satellite for 5 minutes, the GPS
receiver is turned OFF for the selected
period of time. (1, 2, 4, or 8 minutes).
After this period, the receiver resumes
receiving.
•Auto: When the receiver cannot receive
signals from a satellite for 5 minutes, the
GPS receiver is turned OFF for 1 minute.
After this period, the receiver resumes
receiving. The Power Save interval time
extends to 2, 4, and then 8 minutes
when receiving no signals for another 5
minutes, respectively.
Satellite Information Out
(Default: GPS/QZSS/GLONASS)
Selects whether or not to output the data from
the QZSS (Quasi-Zenith Satellite System)
satellites and the GLONASS satellites.
•GPS/QZSS/GLONASS:
Outputs the data from the GPS
satellites, the QZSS satellites, and
the GLONASS satellites.
•GPS Only: Outputs the data from only the GPS
satellites.
» GPS >
GPS Set
Manual Position
(Default: LATITUDE: 0°00.00′N,
LONGITUDE: 0°00.00′W, ALTITUDE: ------ft)
Manually enter the latitude, longitude, and
Altitude of your current position.
L
You can capture position data from the GPS
receiver if “Capture From GPS” is selected.
