![background image](http://html.mh-extra.com/html/icom/ic-705/ic-705_advanced-manual_612188117.webp)
12-34
12. GPS OPERATION (ADVANCED)
GPS SET
Altitude
(Default: OFF)
Selects whether or not to transmit altitude data
with the position data in the D-PRS mode.
L
The number of characters you can enter in
“Comment” differs, depending on the “Altitude” and
“Data Extension” settings.
•OFF: No altitude data is transmitted.
•ON: Transmits altitude data with position
data.
Data Extension
(Default: OFF)
Selects whether or not to transmit the Course/
Speed data or the Power/Hight/Gain/Directivity
data with the position data in the D-PRS mode.
L
The number of characters you can enter in
“Comment” differs, depending on the “Altitude” and
“Data Extension” settings.
•OFF:
Does not transmit any
information.
•Course/Speed: Transmits the course and
speed data with the position
data.
L
The course and speed data
are not transmitted when your
location is manually set.
L
When transmitting with this
setting, your station is regarded
as a mobile station.
•Power/Height/Gain/Directivity:
Transmits the TX power level,
height, antenna gain, and
antenna direction, along with
the position data.
L
The Power, Height, Gain, and
Directivity data are transmitted
even if your location is manually
set.
L
When transmitting with this
setting, your station is regarded
as a base station.
Power
(Default: 0W)
Selects the TX power level of the base station, to
transmit along with the position data.
L
This item is displayed when “Data Extension” is set
to “Power/Height/Gain/Directivity.”
•Select 0, 1, 4, 9, 16, 25, 36, 49, 64, or 81 W.
Height
(Default: 10ft)
Selects the height of the base station’s antenna,
to transmit along with the position data.
L
This item is displayed when “Data Extension” is set
to “Power/Height/Gain/Directivity.”
•Select 10, 20, 40, 80, 160, 320, 640, 1280,
2560, or 5120 feet.*
* If the Altitude/Distance unit is set to “m,” select 3, 6,
12, 24, 49, 98, 195, 390, 780, or 1561 meters.
Gain
(Default: 0dB)
Selects the gain of the base station’s antenna, to
transmit along with the position data.
L
This item is displayed when “Data Extension” is set
to “Power/Height/Gain/Directivity.”
•Select between 0 and 9 dB.
Directivity
(Default: Omni)
Selects the direction the base station’s antenna
was pointing, to transmit along with the position
data.
L
This item is displayed when “Data Extension” is set
to “Power/Height/Gain/Directivity.”
•Select Omni, 45º NE, 90º E, 135º SE, 180ºS,
225º SW, 270º W, 315º NW, or 360º N.