![background image](http://html.mh-extra.com/html/icom/ic-705/ic-705_advanced-manual_612188110.webp)
12-27
12. GPS OPERATION (ADVANCED)
GPS Logger function
The GPS Logger function enables you to
save location data from a GPS receiver onto a
microSD card as a log.
The GPS Logger saves Latitude, Longitude,
Altitude, Positioning state, Course, Speed, Date,
and Time.
If you use this GPS Logger while traveling,
you can check your trip history on a mapping
software.
NOTE:
• The GPS Logger function requires a microSD card
(User supplied).
• Once the GPS Logger function is turned ON, the
transceiver continuously saves location data from
the GPS receiver, even if the transceiver is turned
OFF, then ON again. To cancel this function, turn
OFF the function. While this function is ON, and
when the transceiver is turned OFF, the log file will
be closed. Then the transceiver is turned ON and
Positioning is carried out by the GPS receiver, a
new log file will be created.
• When the microSD card is full, this function is
automatically paused.
D
GPS Logger operating outline
To use GPS Logger function, perform the
following operations.
1. Insert a microSD card*.
* User supplied.
2. Check whether or not the GPS receiver is
receiving your location data. (Basic manual)
3. Turn ON the GPS Logger function.
Completed!
You can start using the GPS Logger function�
D
Confirming the GPS Logger function
Confirm the GPS Logger function is turned ON.
When the GPS Logger function is ON, the
transceiver saves the location data from the GPS
receiver into a microSD card in a set time interval.
L
The saved GPS sentences are GGA, RMC, GSA,
and VTG.
1. Open the GPS LOGGER screen.
» GPS >
GPS Logger
2. Confirm “GPS Logger” is set to “ON.”
3. To close the GPS LOGGER screen, push
several times.
D
Setting the GPS record interval
For example, when you are walking, and if the time
interval is set to “1 sec,” a lot of position data is
saved in a short distance. Select the GPS Logger
function record interval to suit your travel speed.
1. Open the GPS LOGGER screen.
» GPS >
GPS Logger
2. Touch “Record Interval.”
3. Touch the option to set. (Default: 10sec)
L
Select 1, 5, 10, or 30 seconds, or 1, 5, or 10
minutes.
4. To close the GPS LOGGER screen, push
several times.