![background image](http://html.mh-extra.com/html/icom/ic-705/ic-705_advanced-manual_612188208.webp)
15-24
15. ABOUT THE DV GATEWAY FUNCTION
Troubleshooting
D
Troubleshooting for the Access Point mode operation
The following chart is designed to help you correct problems which are not equipment malfunctions.
If you are unable to locate the cause of a problem or solve it through the use of this chart, contact your
Icom Dealer or Service Center.
Problem
Possible Cause
Solution
REF�
After your call, the repeater
does not return a status reply.
(No S-meter indication)
The wrong Access Point mode
transceiver is selected in the
Remote D-STAR transceiver.
Set “FROM” to the correct Access
Point mode transceiver.
–
The manually entered frequency
or duplex setting is wrong in the
Remote D-STAR transceiver.
Set the correct frequency or
duplex setting.
–
The transmission from the Remote
D-STAR transceiver did not reach
the Access Point mode transceiver.
Move to a place where the
Remote D-STAR transceiver can
reach the Access Point mode
transceiver.
–
Transceiver connection is wrong.
When using the Internal Gateway
function, check the connection
between the transceiver and the
router.
When using the External Gateway
function, check the connection
between the transceiver and the
Windows or Android device.
The Remote D-STAR transceiver’s
call sign has not been added
to “Allowed Call Sign List” in
the transceiver, RS-MS3W, or
RS-MS3A, when “Allowed Call
Sign” is set to “Enable.”
When using the Internal Gateway
function, add the Remote D-STAR
transceiver’s call sign to “Allowed
Call Sign List” in the INTERNAL
GATEWAY SETTINGS screen.
When using the External Gateway
function, add the Remote D-STAR
transceiver’s call sign to “Allowed
Call Sign List” in the RS-MS3W or
RS-MS3A.
RS-MS3W,
RS-MS3A’s
instruction
manual
When using the External Gateway
function, you did not click (touch)
<Start> in the RS-MS3W or
RS-MS3A.
Click (touch) <Start> in the
RS-MS3W or RS-MS3A.
After your call, the repeater
replies “UR?,” the Access
Point call sign and ID suffix
“G.”
The call was successfully sent to
the Access Point, but no station
immediately replied.
Wait for a while, and try again.
–