![background image](http://html.mh-extra.com/html/icom/ic-705/ic-705_advanced-manual_612188193.webp)
15-9
15. ABOUT THE DV GATEWAY FUNCTION
Setting up a network
D
When connecting your device to the Internet using a mobile router
*
1
A static IP address to the transceiver, Windows, or
Android device is recommended.
*
2
Needs a Global IP address and forwarding port
number 40000.
1� A Global IP address
A static or dynamic IPv4 Global IP address assigned to the router is needed.
L
Your router may not have a Global IP address, depending on your Internet service provider.
Ask your Internet service provider about the Global IP address setting.
2� Setting a static local IP address
When using a mobile router, you need to set a static local IP address to the transceiver, Windows, or Android
device.
L
Usable IP addresses differ, depending on your router. Ask the router’s manufacturer for details.
L
Do not set the same IP address to two or more devices that are connected to the same router.
L
Ask your Windows or Android device’s manufacturer about the setting details.
L
See page 15-6 for the transceiver’s setting details.
3� Port forwarding
When using a mobile router, enable communication with the Internet, as described below.
• Forward the port number 40000 to the transceiver, Windows, or Android device.
• “UDP” should be used as the port protocol.
• Set a static local IP address in Procedure 2 (2. Setting a static local IP address) as a destination port.
L
Ask the router’s manufacturer about how to forward the port.
L
Only one transceiver, Windows, or Android device connected to the router can use the DV Gateway function at
the same time.
L
Depending on the router settings, you must configure the IP filter settings. Check the router’s manual on how to
configure the settings.
When using the Internal Gateway function, go to “Setting up the transceiver.” (p. 15-10)
When using a Windows device, go to “Setting up the RS-MS3W.” (p. 15-12)
When using an Android device, go to “Setting up the RS-MS3A.” (p. 15-13)
INTERNET
INTERNET
The following items are needed to use the DV
Gateway function.
• An Internet connection with an IPv4 Global IP
address
• A static*
1
local IP address set to your transceiver,
Windows, or Android device
• Port forwarding of port 40000
USB
cable
USB cable
*
1
*
2
*
2
*
2
*
1
*
1