![background image](http://html.mh-extra.com/html/icom/ic-705/ic-705_advanced-manual_612188177.webp)
14-31
14. D-STAR OPERATION (ADVANCED)
Entering new information into the repeater list
D
Skip setting for the DR scan
You can set repeaters as scan skip repeaters. The selected repeaters are skipped for faster scanning.
You can set the skip setting to all repeaters in the selected repeater group, or to individual repeaters.
L
When a repeater is set as a skip repeater, its “USE (FROM)” setting is automatically set to “NO.” In that case, the
repeater cannot be selected in “FROM” (Access repeater) on the DR screen.
Individual skip setting
1. Open the REPEATER GROUP screen.
»
2
> DV MEMORY >
Repeater List
2. Touch a repeater group where the repeater
you set the skip setting is listed.
(Example: 12: Japan)
3. Touch a repeater that you want to skip for 1
second. (Example: Hirano)
4. Touch “SKIP.”
• Displays “SKIP” in the upper right corner.
L
To cancel the skip setting, touch “SKIP” again.
L
To set the skip setting to all repeaters in the
group, touch “SKIP All ON.”
5. To close the Repeater List screen, push
several times.
Group skip setting
On the REPEATER GROUP screen, push
,
then touch “SKIP All ON” to skip the repeaters in
the group during the DR scan.
L
To cancel the skip settings in the group, touch
“SKIP All OFF.”
TIP:
• When you select “Repeater List” on the FROM
SELECT screen, you can set the skip setting as
described to the left.
• When “FROM” is selected on the DR screen, push
, then touch “SKIP” to set the skip setting,
as shown below.