![background image](http://html.mh-extra.com/html/icom/ic-705/ic-705_advanced-manual_612188191.webp)
15-7
15. ABOUT THE DV GATEWAY FUNCTION
Setting up a network
D
When connecting your device to the Internet using a router
*
1
A static IP address to the transceiver, Windows, or
Android device is recommended.
*
2
Needs a Global IP address and forwarding port
number 40000.
3� Port forwarding
When using a router, enable communication with the Internet, as described below.
• Forward the port number 40000 to the transceiver, Windows, or Android device.
• “UDP” should be used as the port protocol.
• Set a static local IP address in Procedure 2 (2. Setting a static local IP address) as a destination port.
L
Check the router’s manual about how to forward the port.
L
Only one transceiver, Windows, or Android device connected to the router can use the DV Gateway function at
the same time.
L
Depending on the router settings, you must configure the IP filter settings. Check the router’s manual on how to
configure the settings.
When using the Internal Gateway function, go to “Setting up the transceiver.” (p. 15-10)
When using a Windows device, go to “Setting up the RS-MS3W.” (p. 15-12)
When using an Android device, go to “Setting up the RS-MS3A.” (p. 15-13)
INTERNET
INTERNET
USB cable
USB cable
*
1
*
1
*
2
*
2
*
2