background image

1 | 

P a g e

 

 

 

 

CINELEX PRODUCT OPERATION GUIDE  
 

Cinelex  DESK-TX8  Wireless DMX transmitter

 

Thank you purchasing the Cinelex Desk-TX8. The DESK-TX8 is an 8 fader portable wireless 

transmitter using the LumenRadio CRMX standard protocol. It will transmit DMX512 industry 

standard DMX signals to any LumenRadio compatible wireless receiver such as the Cinelex 

Skynode or TRX, as well as any other compatible receiver or light fixture. 

 

Features 

 

TRULY  WIRELESS  - The “Go Anywhere” portable wireless DMX control desk.  

 

OPERATE WITH PAGES - Activate up-to 512 DMX channels, controlled through 64 Pages. 

 

LumenRadio COMPATIBLE - Syncs seamlessly to any Cinelex SKYNODE or TRX or any light or 

receiver with an integral LumenRadio receiver chipset. 

 

PROFESSIONAL READY - Robust design, constructed with extruded aluminium - built to withstand 

tough rental & on-set environments. 

 

MULTIPLE POWER INPUTS – 5~30V operation allows for multiple power options, including over 24 

hours run-time from 4x AA batteries. 

 

STANDARDS COMPLIANT 

All Cinelex products meet international regulatory standards including FCC, CE & RoHS 

Summary of Contents for DESK-TX8







Reviews: