Icom IC-2820H, Instruction Manual

Page: 89 / 164

68
6
MEMORY MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■
Copying memory contents
This function copies a memory channel’s contents to VFO
(or
another memory/call channel)
. This is useful when searching for
signals around a memory channel frequency and for recall-
ing the offset frequency, subaudible tone frequency etc.
D
Memory/call
➪
VFO
q
Select the desired band’s
(left or right)
memory or call chan-
nel.
➥
Push the desired band’s [M/CALL•MW] several times to
select memory mode or call channel, then rotate the
same band’s [DIAL] to select the desired memory or call
channel.
w
Push and hold [M/CALL•MW] for 2 sec. to copy the se-
lected memory/call channel contents to the VFO.
• VFO mode is selected automatically.
z
Push [BAND] to select the desired band as
the main band, if necessary.
x
Select the memory/call channel to be copied.
➥
Push [MR/CALL] to select memory mode,
then select the desired memory channel
via [
Y
]/[
Z
] or keypad.
➥
Push and hold [MR/CALL] for 1 sec. then
push [
Y
]/[
Z
] to select the call channel.
c
Push [FUNC], then push and hold
[
CLR
A(MW)] for 1 sec. to copy the selected
memory/call channel contents to the VFO.
• VFO mode is selected automatically.
MR/CALL
MW
Y
/
Z
[EXAMPLE]: Copying memory channel 30 contents to VFO.
Push to select memory mode.
Front panel operation:
HM-133 operation:
Push to select memory mode.
Rotate for selecting memory channel.
Select memory channel.
Push and hold (same band’s) for 1 sec.
Push then push and hold for 1 sec.
M/CALL
MW
M/CALL
MW
M
A
IN B A
N
D