Icom IC-2820H, Instruction Manual

Page: 55 / 164

34
4
REPEATER OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■
Offset frequency
When communicating through a repeater, the transmit fre-
quency is shifted from the receive frequency by an amount
determined by the offset frequency.
Independent offset frequencies can be set for each operating
frequency band.
q
Push [MAIN•BAND] to select the desired band
(left or right)
as the main band.
w
Select the desired mode/channel you wish to set the offset
frequency for, such as VFO mode or memory/call channel.
e
Push [
F
• ] to display the function guide then push
[MENU](V/MHz•SCAN)
(Right band’s)
to enter MENU
screen.
r
Rotate [DIAL] to select
“
DUP/TONE…
”
, then push
[MAIN•BAND].
t
Rotate [DIAL] to select “OFFSET FREQ” item, then push
[MAIN•BAND].
y
Rotate [DIAL] to set the desired offset frequency.
• Push [MHz](V/MHz•SCAN) (Left band’s) to turn 1 MHz tuning
ON and OFF
u
Push [BACK](V/MHz•SCAN)
(Right band’s)
twice to exit
DUP/TONE set mode.
z
Push [BAND] to select the desired band
(left or
right)
as the main band.
• Enter the desired frequency via the keypad if neces-
sary.
x
Select the desired mode/channel you wish to
set the offset frequency for, such as VFO mode
or memory/call channel.
• The offset frequency can be independently pro-
grammed into each mode or channel.
c
Push [
SET
B(D-OFF)] to enter MENU screen.
v
Push [
Y
] or [
Z
] to select “DUP/TONE…” then
push [
SET
B(D-OFF)].
b
Push [
Y
] or [
Z
] to select “OFFSET FREQ” then
push [
SET
B(D-OFF)].
n
Push [
Y
] or [
Z
] to set the desired offset.
• Direct frequency entry from the keypad is not possi-
ble.
m
Push [
CLR
A(MW)] to exit set mode.
NOTE: The offset frequency can be set in a
memory/call channel temporarily. However, the
set frequency is cleared once another memory
channel or VFO mode is selected. To store the
offset frequency permanently, overwrite the
channel information.
SET
B
[MENU]
[
F
• ]
[DIAL]
[MAIN•BAND]