![background image](http://html.mh-extra.com/html/icom/ic-2820h/ic-2820h_instruction-manual_612069073.webp)
52
5
DV MODE OPERATION (Optional UT-123 is required)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■
Message operation
D
D
TX message programming
TX messages are available for up to 5 channels, and each
channel can be programmed with a message of up to 20
characters. Available characters are 0 to 9, A to Z
(capital let-
ters)
, a to z
(lower case letters)
, some symbols and space.
q
Push [
F
•
] to display the function guide.
w
Push [MENU](V/MHz•SCAN)
(Right band’s)
to display the
“MENU” screen.
e
Rotate [DIAL] to select “DV MESSAGE,” then push
[MAIN•BAND].
r
Rotate [DIAL] to select “TX MESSAGE MEMORY,” then
push [MAIN•BAND].
t
Rotate [DIAL] to select the desired message memory
channel, 01 to 05, then push [MAIN•BAND].
• Previously message is displayed if programmed.
y
Rotate [DIAL] to select the desired character.
• Push [Aa](TONE•DTMF) to turn the character group from alpha-
betical characters capital letters or lower case letters.
• Push [1/](M/CALL•MW) (Right band’s) to turn the character
group from numbers or symbols.
• Push [>](M/CALL•MW) or [<](V/MHz•SCAN) (Left band’s) to
move the cursor right or left, respectively.
• Push [CLR](DUP•MONI) to clear the selected character.
u
Repeat the step
y
to enter the desired message.
• Up to 20-character messages can be set.
i
Push [MAIN•BAND] to store the message.
e
Push [BACK](V/MHz•SCAN)
(Right band’s)
twice to exit
from DV message screen.
Summary of Contents for IC-2820H
Page 160: ...139 MEMO ...
Page 161: ...140 MEMO ...
Page 162: ...141 MEMO ...
Page 163: ...142 MEMO ...