![background image](http://html.mh-extra.com/html/icom/ic-2820h/ic-2820h_instruction-manual_612069058.webp)
37
5
DV MODE OPERATION (Optional UT-123 is required)
D
D
Your own call sign programming
Your own call sign must be programmed for both digital voice
and low-speed data communications
(including GPS transmis-
sion)
.
q
Push [
F
•
] to display the function guide.
w
Push [MENU](V/MHz•SCAN)
(Right band’s)
to enter MENU
screen.
e
Rotate [DIAL] to select “CALL SIGN MEMORY” then push
[MAIN•BAND].
r
Rotate [DIAL] to select “MY CALL SIGN MEMORY” then
push [MAIN•BAND].
t
Rotate [DIAL] to select the desired call sign channel
(M01
to M06)
, then push [MAIN•BAND].
y
Rotate [DIAL] to select the desired character, then push
[>](M/CALL•MW)
(Left band’s)
to move the cursor right.
• Push [<](V/MHz•SCAN) (Left band’s) to move the cursor left.
• Up to 8-character call signs can be entered.
• Push [ABC](TONE•DTMF) to select the character group from
capital letter characters.
• Push [12/](M/CALL•MW) (Right band’s) to select the character
group from numbers or symbols.
• Push [CLR](DUP•MONI) to clear the selected character.
u
Repeat step
y
until your own call sign is programmed.
i
Push [>](M/CALL•MW)
(Left band’s)
several times to move
the cursor to “/” position.
• A to Z, 0 to 9 and “/” characters are available.
• If no note is required, skip steps
i
and
o
, go to step
!0
.
o
Repeat step
y
to program the desired 4-character note.
!0
Push [MAIN•BAND] to store the programmed call sign
(or
with note)
.
!1
Push [BACK](V/MHz•SCAN)
(Right band’s)
three times to
return to frequency indication.
Summary of Contents for IC-2820H
Page 160: ...139 MEMO ...
Page 161: ...140 MEMO ...
Page 162: ...141 MEMO ...
Page 163: ...142 MEMO ...