![background image](http://html.mh-extra.com/html/icom/ic-2820h/ic-2820h_instruction-manual_612069148.webp)
127
16
GPS/GPS-A OPERATION
D
D
Position indication
q
Push [
F
•
] several times to display function guide 3.
w
Push [POSI](M/CALL•MW)
(Left band’s)
once to display the
“POSITION” screen.
e
Push and hold [G-WR](DUP•MONI) for 1 sec. to store the
your current position information, if desired.
r
Push [
F
•
] once to return to frequency indication.
D
D
GPS data communication
The transceiver transmits a GPS data or DV data to your con-
necting PC via the [DATA] jack depending on the data com-
munication setting.
➥
While in DV mode operation and displayed position
indication as above, push [DATA](V/MHz•SCAN)
(Left
band’s)
to toggle the GPS data communication ON and OFF.
• ON : GPS data from the connected GPS receiver.
• OFF: DV data such as the low-speed data communica-
tion data (p. 57) or received position data (p. 129).
D
D
GPS Automatic transmission
q
Enter MENU screen via function guide.
➥
Push [
F
•
] to display function guide.
➥
Push [MENU](V/MHz•SCAN)
(Right band’s)
to enter
MENU screen.
w
Rotate [DIAL] to select “DV SET MODE,” then push
[MAIN•BAND] to enter DV set mode.
e
Rotate [DIAL] to select “DV DATA TX,” then push
[MAIN•BAND].
r
Rotate [DIAL] to select “AUTO,” then push [MAIN•BAND].
t
Push [BACK](V/MHz•SCAN)
(Right band’s)
to return to
MENU screen.
y
Rotate [DIAL] to select “DV GPS,” then push
[MAIN•BAND] to enter DV GPS set mode.
u
Rotate [DIAL] to select “GPS TX,” then push
[MAIN•BAND].
i
Rotate [DIAL] to select “GPS,” then push [MAIN•BAND].
Frequency
Position indication
“G-D” appears when GPS data communication is set to ON.
Summary of Contents for IC-2820H
Page 160: ...139 MEMO ...
Page 161: ...140 MEMO ...
Page 162: ...141 MEMO ...
Page 163: ...142 MEMO ...