Copyright © 2012 by AAS Technology
SD-11
www.AAS.com.tw
R201207-V31
User Manual
SD/HD/3G-SDI Transmission over Ethernet Kit
HD-SDE-SEDK
The HD SDI video network H.264 Encoder/Decoder adopts industrial level design, reliable
performance, and outstanding quality. The Encoder supports 1 channel SD/HD/3G-SDI input
interface and it supports high definition digital video which is up to 1080p30 and AES/EBU
embedded audio. The SDI can output with loopback circuit simultaneously.
The Decoder receives signal from the Encoder from TCP/IP network. After getting through the
self-adaptive decoding, it will output video/audio signals as the SD/HD/3G-SDI standard signal
formats. The Decoder can output 2 channel SDI signals simultaneously. Even if the Decoder
connects with an encoding video of low code rate, the network packet loss is only about 10%
because of the integration of image enhancement and fault-tolerant technology. It can clearly
restore encoding video and audio with no obvious distortion, smear, frame loss and mosaic.
To ensure picture quality and acoustic fidelity, the Encoder and Decoder should match the code
rate from 512Kbps to 30Mbps of the adjustable encoder video to network. The Decoder can
configure and select the output video formats and it also supports the multi formats of
1080p24/25/30, 720p60/50.
The Encoder and Decoder is convenient to integrate with any kind of software management
platform because it offers operation and management of web, supports the RTP/RTSP
transmission protocol standards, supports network management programming interface and
supports NAT Transversal (firewall penetration). Both the Encoder and Decoder supports 2-way
voice talkback, 1 channel RS-485 signaling and 1 channel bi-directional alarm semaphore.
HD-SDE-SE
SD-11a
HD-SDE-SD
SD-11b
Encoder
Decoder
NOTE: The casing design is
subject to change without notice.
